Navigation

How To Find The Right Auto Repair Shop in Clearwater

Home ยป How To Find The Right Auto Repair Shop in Clearwater

The brakes are one of the most important components on any vehicle. It may be easy to assume that the engine needs to be functioning properly, and a transmission has to shift smoothly in order to get your car to go, but if you can’t stop, then you put yourself, passengers, and anyone else on the road at risk.

There are several issues that can cause brakes to have problems. When your brakes are operating well enough, meaning you are coming to a complete stop in a fair amount of time, that doesn’t necessarily mean they are in good working condition. Below are five tips to help you understand when it could be time to have your brakes checked by a professional auto repair technician in Clearwater, Florida.

Do not take the condition of your brakes lightly. Just because you can stop now, if there is an issue with your braking system, the next time it might take longer to stop and that can cause an accident.

Pedal Depresses Too Far

The brakes on any vehicle should engage within a couple of inches when you depress the brake pedal. The more wear that exists on your brakes, such as the brake pads, the further down the pedal will move before the brakes begin to engage.
It is a habit among far too many drivers today to assume that as long as the brakes do eventually engage before the pedal hits the floorboard, then the system is working properly.

The truth of the matter is that when your pedal moves more than one third the way down before you feel any engagement of the braking system, then there is a brake issue that needs to be addressed and resolved.
The most common reason that your brakes do not engage within the first couple of inches when you press the pedal is the pads are beginning to wear down. The entire brake system relies on hydraulic pressure and it begins in the brake fluid reservoir. The farther down your pedal goes before the brakes grab, the more worn your brake pads likely are. It could also be that your brake fluid level is too low.

And either case, you need to have them checked as soon as possible.

Groaning Noise Whenever You Stop

When you are coming to a stop and applying the brakes, a groaning noise that could sound like metal on metal or the deep rumbling of a grown man’s voice could indicate that your brake pads are completely worn down.

A groaning noise that only occurs when you apply the brakes is a good indicator that you need to have new brake pads installed on your car. You may have ignored or missed the warning signs prior to this noise occurring.

The groaning is most likely caused by the metal components of the brake pad compressing against the metal rotor. If you hear this noise, it is going to be necessary to not only change the brake pads but also the rotors due to damage that is being caused in the process.

Do not ignore this sound. This is the absolute moment when you have to have your brakes replaced. Failing to do so can result in you losing control of the vehicle or being unable to stop at an intersection or in an emergency situation.

Sluggish Stopping

If you notice that your car is taking a lot longer to come to a full and complete stop, then there is an issue with your brake system. Sluggish stopping could be the result of a variety of issues, including debris getting into your brake system, having too much water (such as driving through flooded roadways), or having some other fluid that is spilling onto your brakes.
If it takes your car longer to stop than it used to or that you believe it should, get to an auto repair technician in Clearwater as soon as possible.

You Hear a High Pitched Sound when Brakes Are Applied

One of the most common indicators that your brake pads are wearing down is a high-pitched squeal that emits from your car when you are applying the brakes. This high-pitched squeal will not be heard if you have the radio on too loud, but you should be able to hear it over general road noise, even if you are running the air-conditioning system full blast.

This high-pitched squeal or piercing sound is caused by a rod that is inserted into most brake pads that will begin to rub against the brake rotors when the pads are wearing down to low. When you hear this high-pitched sound, there is still life left in your brake pads, but it is coming to an end. It is time to bring your car to an auto repair shop to have the brake pads replaced.

Brake Indicator Late Stays On

In your car, you have a brake indicator light. This is most likely illuminated in red letters spelling out the word “Brake.” When you start your car, most service indicator lights on the dashboard will illuminate, including the brake light. If that brake light stays on when you are driving, it is the computer’s diagnostic system telling you that there is an internal problem with the brake system.

This could most likely be the master cylinder, but it could be the emergency brake or some other system, such as anti-lock braking, that could be failing. You should not ignore this light. Bring your car to Peterson Auto Repair Shop in Clearwater as soon as possible.

Any time the brake indicator light goes on, it could be a minor issue, but it could be much more serious and significant. Do not take this warning light lately.

usedvehicle.JPG